ynamic ost onfiguration rotocol: is a network protocol progressed from the older bootp protocol. A DHCP server issues IP addresses based on requests sent to it from client hosts. There is one in the laboratory (with suitable backup) and as the older static IP addresses are being returned to the UCS they are being replaced with private or public/private addresses from on the server. Apart from making a single change to the machines IP configuration, the end-users is not affected by IP re-configuration. No other DHCP server should be run and changes to DHCP should not be made without guidance from CAV-IPREGISTER@phy.

An IETF standard that automatically configures hosts, using a DHCP server.

Dynamic Host Control Protocol A communications protocol that lets network administrators supervise and distribute IP addresses from a central point to each computer or device on a network.

DHCP is an enhancement of an existing communications protocol that permits network administrators to more easily configure network resources. It is found on NT networks.

Protocol for automatic TCP/IP configurations. DHCP provides static and dynamic address allocation and management.

ynamic ost onfiguration rotocol is a method that manages and automatically assigns IP addresses to workstations. A pool of address is stored on a DHCP server, this may or may not be the main network server. Each workstaiton requires a unique IP address. When a workstation logs onto the network, the DHCP server temorarily leases an address from its pool to the workstation. When the workstation logs off the network, the address is returned to the pool. The returned address can then be assigneed to another computer as it log into the network. In this way, a network can have more computers than IP addresses.

Provides a framework for passing configuration information to hosts on a TCP/ IP network. DHCP is based on BOOTP, adding the capability of automatic allocation of reusable network addresses and additional configuration options. DHCP captures the behavior of BOOTP relay agents, and DHCP participants can interoperate with BOOTP participants. DHCP consists of two components: a protocol for delivering host-specific configuration parameters from a DHCP server to a host and a mechanism for allocation of network addresses to hosts.

A protocol that provides a mechanism for allocating IP addresses dynamically so that an address can be reused when a host no longer needs it.

A protocol used to support dynamic IP addressing. Rather than giving you a static IP address, your ISP may assign a different IP address to you each time you log on. This allows the provider to serve a large number of customers with a relatively small number of IP addresses.

A TCP / IP protocol that allocates IP addresses automatically to any DHCP client (any device attached to your network, such as your PC) so that addresses can be reused when the client no longer needs them.

A DHCP refers to the protocol used by a host computer to obtain an IP address so that it can communicate with other host computers. These addresses are usually dynamic, meaning they change periodically, so a connection cannot be obtained (or maintained) over the open Internet. Use of both static IP addresses and dynamic DNS helps establish a consistent connection.

Dynamic Host Control Protocol - Used to dynamically assign IP addresses to system as they are started and to reclain addresses as they shutdown.

ynamic ost onfiguration rotocol. A protocol used by ISPs and some routers to automatically assign IP addresses to client computers and devices. DHCP is most commonly used for establishing remote connections to the Internet. When a dial-up user logs on or when a cable modem user boots up their computer, a request is made to their ISP's DHCP server. This request basically says, "Hey, I want Internet access!" After authorizing the request (typically with a username and password), the DHCP server picks out an IP address and leases it to the user's computer, thus providing Internet access. The same thing works on a smaller scale for Internet sharing setups; the server computer or router automatically assigns IP addresses to other computers on the LAN.

DHCP is a protocol that lets network administrators automate and centrally manage the assignment of Internet Protocol (IP) addresses to network devices in a network. DHCP uses the concept of a "lease" or amount of time that a given IP address will be valid for a computer. The lease time can vary, depending on how long a user is likely to require the network connection at a particular location. DHCP also supports static addresses for e.g. computers running web servers, which need a permanent IP address.

A protocol that provides a means to dynamically allocate IP addresses to computers on a local area network. The system administrator assigns a range of IP addresses to DHCP and each client computer on the LAN has its TCP/IP software configured to request an IP address from the DHCP server. The request and grant process uses a lease concept with a controllable time period.

Used by ISPs to assign IP addresses to their customers on a per dial-up connection basis.

Dynamic Host Control Protocol. A protocol that dynamically allocates IP addresses to computers on a local area network.

Protocol that automatically and dynamically assigns IP addressees.

An addressing protocol for TCP/IP networks. IP addresses are leased to individual computers on the network from a DHCP server. DHCP allows users to move to different locations on a network without having to bother a network administrator to manually assign a new IP address. DHCP is useful where several computers share a single high-speed Internet connection.

The process by which an IP address, gateway, subnet mask, DNS settings, and domain are all assigned to a computer requesting it.

An Internet standard protocol that assigns new IP addresses to users as need.

An Internet protocol used to automatically assign IP addresses and to deliver information such as router and printer addresses.

A protocol that dynamically assigns IP address to devices on the network.

ynamic ost onfiguration rotocol -- DHCP automatically manages allocation of IP addresses to network resources. With DHCP, network administrators do not have to set IP addresses for different machines manually. With DHCP, a user can plug a machine into a network in different locations and automatically be assigned an IP address.

( ynamic ost onfiguration rotocol) A networking protocol that provides the means to dynamically allocate IP addresses to computers on a local area network.

See dynamic host configuration protocol.

Dynamic Host Configuration Protocol. A protocol for dynamically assigning IP addresses from a pre-defined list to nodes on a network. When they log on, network nodes automatically receive an IP address from a pool of addresses served by a DHCP. The DHCP server provides (or leases) an IP address (to a client for a specific period of time. The client will automatically request a renewal of the lease when the lease is about to run out. If a lease renewal is not requested and it expires, the address is returned to the pool of available IP addresses. Using DHCP to manage IP addresses simplifies client configuration and efficiently utilizes IP addresses. (See IP address). close

(Dynamic Host Configuration Protocol) DHCP is a protocol by which a machine can obtain an IP number (and other network configuration information) from a server on the local network.

Allows a server to dynamically assign IP addresses to nodes (workstations) on the fly.

DHCP / (Dynamic Host Configuration Protocol) is used to make the allocation of IP addresses automatic, and simple to administer. A network server uses this protocol to dynamically assign IP addresses to networked devices. The DHCP server waits for a device to connect to it, then assigns it an IP address from a range of addresses on the server. DHCP can also assign the subnet mask, Default Gateway, and Domain Name Server IP addresses (DNSs).

Dynamic Host Configuration Protocol. Using the Internet's set of protocols (TCP/IP), each machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users with a connection to the Internet, an IP address must be assigned to each machine. DHCP lets a network administrator supervise and distribute IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network.

(Dynamic Host Configuration Protocol) - A means of configuring the TCP/IP settings of client computers automatically from a central location (usually a server computer or router).

DHCP Service is a client/server system available with Windows NT Server.  DHCP automatically assigns IP addresses to devices whenever you plug them in .  For example, this allows you to connect phones anywhere on the IP network and DHCP automatically assigns IP addresses to them.  You can also move phones from one location on the network to another with no configuration.

Dynamic Host Configuration Protocol automatically assigns an IP address to the computer (or PlayStation®2 system) that logs onto the network. If you connect to your ISP with Dynamic IP Addressing, they are using DHCP.

Dynamic Host Configuration Protocol. An open Standard for configuring hosts' interfaces at boot time.

Dynamic Host Configuration Protocol. A TCP/IP protocol that assigns Internet protocol addresses to stations in a network. The DHCP-server computer makes the assignments, and the client computer calls the server computer to obtain the address.

Software that automatically assigns IP addresses to client stations logging onto a TCP/IP network. It eliminates traditional manual assignment of permanent IP addresses. DHCP software typically runs in servers and is also found in network devices such as ISDN routers and modem routers that allow multiple users access to the Internet. Newer DHCP servers update the DNS servers after making assignments.

Dynamic Host Configuration Protocol - under DHCP, devices on a network do not have static (fixed) IP addresses. Devices are given an IP address by a DHCP server. This technique simplifies the life of a network administrator. A Microsoft Windows PC uses DHCP if it has "Obtain an IP address automatically" checked in the TCP/IP Properties for its Network Interface Card.

Dynamic Host Configuration Protocol (DHCP) is a method for automatically assigning IP Addresses to network devices. A DHCP Server (which can be a local router, a server on the internet, or another computer), may use DHCP to automatically dole out IP Addresses to devices connected to it. If your ISP is running DHCP, then you can set your THPS3 game to Auto-Detect (DHCP) and connection configuration is all handled automatically. However, when using DHCP the IP address of your PS2 could change dynamically, each time you play, so you may have problems hosting a game, especially if a firewall is involved.

Stands for Dynamic Host Configuration Protocol. It is a means of automatically distributing network configuration information to computers on a network, usually IP addresses. Some ADSL routers support DHCP which makes installation a lot simpler.

Stands for "Dynamic Host Configuration Protocol." A network server uses this ...

Dynamic Host Configuration Protocol. A networking protocol that provides safe, reliable, and simple TCP/IP network configuration and offers dynamic configuration of Internet Protocol (IP) addresses for computers. DHCP ensures that address conflicts do not occur and helps conserve the use of IP addresses through centralized management of address allocation.

Dynamic Host Configuration Protocol is an Internet protocol for automating the configuration of computers that use TCP/IP. DHCP can be used to automatically assign IP addresses, to deliver TCP/IP stack configuration parameters such as the subnet mask and default router, and to provide other configuration information such as the addresses for printer, time and news servers.

Dynamic Host Configuration Protocol. is a communications protocol that lets network administrators manage centrally and automate the assignment of Internet Protocol (IP) addresses in an organization's network. Each machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users with a connection to the network, an IP address must be assigned to each machine manually without DHCP. With DHCP, the IP addresses may be assigned to each computer automatically. DHCP lets a network administrator supervise and distribute IP addresses from a central point.

Dynamic Host Control Protocol. The network protocol which is used when computers do not know their IP address. A computer without an IP sends a request to a DHCP and the server sends back the needed information to the computer on how establish a TCP/IP connection. This if used with dial-up Internet connections because each user of the service doesn't need their unique IP address because all of the users won't be connected at the same time. When an IP isn't in use, it can be used by another computer.

Dynamic Host Configuration Protocol is used by client computers to retrieve and assign IP addresses, networking information and other configurations.

Dynamic Host Configuration Protocol. A network protocol which dynamically assigns IP addresses to individual workstations as they connect to the network.

Dynamic Host Configuration Protocol. An Internet Proposed Standard Protocol that allows a system to dynamically assign an IP address to individual computers on a network.

Dynamic Host Control Protocol. A utility that enables a server to dynamically assign IP addresses from a predefined list and limit their time of use so that they can be reassigned.

Dynamic Host Configuration Protocol. A protocol that enables dynamic IP addresses assignment to client computers. Dynamic IP address is meant for ISPs to efficiently use the available IP addresses. Dynamic IP address is also a means of protection from harmful access from the Internet. A residential gateway (broadband router) usually has built-in DHCP server to assign dynamic IP addresses to computers in a home network. DHCP server at an ISP assigns dynamic IP addresses to its subscribers therefore vacant IP addresses can be used to whoever requests for Internet connection. Also see dynamic IP address.

Dynamic Host Configuration Protocol. This protocol provides a mechanism for allocating IP addresses dynamically so that addresses can be reused. Often used for managing the IP addresses of all the cable modems in a cable plant and the PC's connected to the cable modems.

Dynamic Host Configuration Protocol. An industry-standard protocol that assigns Internet Protocol (IP) addresses to computers for temporary connected use on an IP network. encryption A way of making data indecipherable while it is being sent from computer to computer. file-name extension mapping Connecting all files with a certain file name extension to a program. For example, through the Windows NT Explorer, all .txt files are associated by default with Notepad. In Internet Explorer, you can associate file name extensions with applications by use of the Helpers dialog box. To display this dialog box, from the View Menu, choose Helpers.

Dynamic Host Configuration Protocol, is a method of automatically assigning IP addresses to client computers on a network.

Dynamic Host Configuration Protocol. IP address allocations scheme that uses BOOTP (Bootstrap Protocol) commands but leases the addresses to end-stations for fixed periods of time, thus allowing re-use.

Dynamic Host Configuration Protocol - An Internet Standard for configuring nomadic and mobile hosts.

Dynamic Host Configuration Protocol. DHCP servers permit multiple devices to share a group of IP addresses, assigning one to a specific device as needed.

Dynamic host configuration protocol. A protocol that allows a central device to automatically issues IP addresses within a specified range to devices on the network. The device retains the assigned address for a specific administrator-defined period.

dynamic host configuration protocol. DHCP is a computer network protocol for centrally assigning and keeping track of Internet Protocol (IP) addresses. Each computer that accesses the Internet must first have an IP address. The IP address can be manually entered into the computer or it can be done automatically by a DHCP server. The automatic method requires less effort by the user and enables centralized management of this network resource. Access points often provide DHCP server service as one of their features.

Dynamic Host Configuration Protocol is a protocol for organizing and simplifying the administration of IP addresses for local machines. In many cases (such as with WinRoute) A DHCP server is built into the gateway for further simplification.

DCHP enables the automatic assignment of an IP address to clients on networks from a pool of addresses. The IP address assignment and configuration occurs automatically whenever appropriate client systems (workstations and portable computers) attach to a network. The Digital UNIX implementation of DHCP is based on the JOIN product by Competitive Automation.

Dynamic Host Configuration Protocol. A protocol that offers dynamic configuration of IP addresses and related information. DHCP provides safe, reliable, and simple TCP/IP network configuration, prevents address conflicts, and helps conserve the use of IP addresses through centralized management of address allocation. Defined in RFC 1541.

Dynamic host control protocol relates to a dynamic process by which a server assigns an IP address to a client workstation.

Dynamic Host Configuration Protocol allows each device on the network to acquire its own unique IP address in order for it to communicate correctly with other devices.

DHCP stands for Dynamic Host Control Protocol - a method for automating connection of networked computers on the JCU network.

Dynamic Host Configuration Protocol-A protocol used to distribute IP addresses to client computers. Each time a client computer starts up, the protocol looks for a DHCP server and then requests an IP address from the DHCP server it finds. The DHCP server checks for an available IP address and sends it to the client computer along with a lease period-the length of time the client computer may use the address.

Dynamic Host Configuration Protocol. A service that lets clients on a LAN request configuration information, such as IP host addresses, from a server.

Dynamic Host Configuration Protocol - Automatically configures the PC Companion with an IP address, subnet and gateway. Optionally, can configure WINS and/or DNS entries. DHCP is supported with Ethernet and wireless LANs including 802.11 and Proxim.

Dynamic Host Configuration Protocol. A superset of the Boot Protocol (BOOTP) which offers greater flexibility for IP address allocation. It provides the standard BOOTP-like method as well as automatic (long-term) or dynamic (short-term) allocation of IP addresses from a pool of available addresses.

dynamic host configuration protocol, a method of dynamically allocating IP addresses to the devices on a network.

Dynamic Host Configuration Protocol automatically assigns IP addresses to clients when they log on. DHCP centralizes IP address management on central computers that run the DHCP server program. DHCP leases addresses, for a period of time, which means that past addresses are "recycled" and made available for future reassignment to other systems.

Abbreviation for Dynamic Host Configuration Protocol, an Internet standard protocol that allows IP addresses to be pooled and assigned as needed to clients.

An acronym for Dynamic Host Configuration Protocol.

Dynamic Host Configuration Protocol. In a Small Business Server network, Small Business Server is also a DHCP server. The DHCP server uses a TCP/IP protocol that enables a client computer connected to the Small Business Server network to be assigned a temporary IP address automatically when the client computer connects to the network.

Dynamic Host Control Protocol. This system allows computers to dynamically allocate IP addresses to client computers requiring connection to the network. This system is a way to avoid having to manually assign each computer it's own address. This allows network administrators to use fewer addresses, since it is unlikely that every computer will need each address all the time.

Dynamic Host Configuration Protocol. A protocol that supplies an IP address and other configuration to an IP device at system startup or reset.

Dynamic Host Configuration Protocol. A protocol that allocates dynamic IP addresses to client stations logging onto a TCP/IP network, so that addresses can be reused when hosts no longer need them. Eliminates having to manually assign permanent IP addresses.

Dynamic Host Configuration Protocol. An automated way of obtaining an IP address in the Local Area Network.

Dynamic Host Configuration Protocol is a standards-based protocol for dynamically allocating and managing IP addresses. DHCP runs between individual computers and a DHCP server to allocate and assign IP addresses to the computes as well as limit the time for which the computer can use the address.

Dynamic Host Configuration Protocol is a method for a device to dynamically assign IP addresses from a central server. DHCP simplifies the administration and configuration of devices on a network.

Dynamic Host Configuration Protocol. An industry-standard (TCP/IP) protocol that assigns Internet Protocol (IP) configurations to computers. The DHCP-server computer makes the assignments, and the client computer calls the server computer to obtain the address.

DHCP stands for 'Dynamic Host Configuration Protocol'. Its basic function is to provide a newly-booting computer with all the information it needs to happily communicate on the network (this information includes things like name, IP, DNS servers, broadcast address and gateway address), thus saving the network administrator from having to go onto each machine to configure them. Except for special networks like SPIN, the University's DHCP server has been set up to provide a specified IP for each MAC Address.

Dynamic Host Configuration Protocol is used to dynamically assign Internet Protocol (IP) addresses to client systems.

Dynamic Host Control Protocol. An effective way to dynamically assign and reuse a fixed number of IP addresses when there are more devices on the network than addresses available. A DHCP server dynamically assigns IP addresses to devices requesting them. These address assignments expire after a time specified by the network manager. The DHCP server then reassigns these addresses to other devices as needed. DHCP is an extension to BOOTP in which the address assignments are static.

Used by server to allocate a number to all computer in a LAN from a pool of numbers.

(Dynamic Host Configuration Protocol) A method for automatically assigning IP addresses on a network. When setting up a network be sure that you only have one DHCP server otherwise they may conflict.

Dynamic Host Configuration Protocol. Dynamically assigns IP addresses to client stations located on a TCP/IP network at startup, and allows the addresses to be re-used when no longer needed. This allows a larger group of stations to share a limited pool of addresses.

Dynamic host configuration protocol. A protocol available with many operating systems that automatically issues IP addresses within a specified range to devices on the network. The device retains the assigned address for a specific administrator-defined period.

This is a client/server protocol running over TCP/IP, which allows a client to automatically obtain a valid I.P address for itself as well as the DNS & gateway servers address for Internet access

Dynamic Host Configuration Protocol. GSN Lite product contains a DHCP-client module, which interacts with the DHCP-server to allocate dynamic addresses while executing dynamic PDP context activation and deactivating contexts on explicit MS request or expiry of lease time for dynamic address so obtain.

Dynamic Host Configuration Protocol. Used for a variety of things, but most often associated with automatically assigning IP addresses to Internet devices (such as computers). A computer will ask for an IP address, and will receive it (along with other related environmental information) via DHCP.

Dynamic Host Configuration Protocol, a method of supplying network details to devices to allow the devices to configure themselves correctly for the local network. DHCP is used by your ISP to allocate network details to your PC when you connect to your Internet broadband or dialup connection.

DHCP stands for Dynamic Host Configuration Protocol. Essentially the DHCP protocol allows dynamic IP address configuration, meaning the user does not have to define an IP address, DNS, Gateway, etc.

DHCP (Dynamic Host Configuration Protocol) is a protocol that allows individual computers on an IP network to extract their configurations from a server. The most significant piece of information distributed in this manner is the IP address.

(Dynamic Host Configuration Protocol) - a standard method for assigning IP addresses (and some others parameters) automatically to the devices on a TCP/IP network. As a new device connects, the DHCP server assigns an IP address from a list of available addresses. The device retains this IP address for the duration of the session - once the device disconnects the IP address becomes available for use again.

(Dynamic Host Configuration Protocol) – This is a protocol that lets network administrators centrally manage and automate the assignment of IP Addresses on the corporate network. When a company sets up its computer users with a connection to the Internet , an IP address must be assigned to each machine. Without DHCP , the IP address must be entered manually at each computer . DHCP lets a network administrator supervise and distribute IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network.DHCP uses the concept of a ‘lease' or amount of time that a given IP address will be valid for a computer. Using very short leases, DHCP can dynamically reconfigure networks in which there are more computers than there are available IP addresses. See Also: IP Address To top

Dynamic Host Configuration Protocol (see RFC 1541). For automatic configuration of TCP/IP; a subset of BootP.

DHCP or dynamic host configuration protocol. DHCP allows client computers to be configured automatically; when a computer is switched on, it searches for a DHCP server and obtains TCP/IP set-up information.

A Dynamic Host Configuration Protocol is a protocol that allows network administrators to run centrally and automate the allocation of IP addresses in a company's network. Without DHCP, IP addresses must be entered manually at each computer and entered again if the computer relocates to another part of the network.

A protocol that lets network administrators centrally manage and automate the assignment of Internet Protocol (IP) addresses in an organisation's network. DHCP distributes IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network.

Dynamic Host Configuration Protocol. An extension of the TCP/IP boot up protocol that is used to configure systems across networks on Windows and other systems.

Dynamic Host Configuration Protocol. An IETF standard used by network administrators to automatically configure hosts. Hosts needing configuration information may broadcast a request that is responded to by a DHCP server.

A protocol that allows remote clients to request configuration information, such as IP host addresses, from a server.

Dynamic Host Configuration Protocol. The method used by many networks to issue IP addresses company computers attached to the network. DHCP server functionality is a must for ADSL routers.

Dynamic Host Configuration Protocol. A protocol to automate the assignment of IP addresses and related information on a network.

The "Dynamic Host Configuration Protocol" automatically assigns static or dynamic IP addresses to clients. It also manages gateway settings for changing networks as well as DNS data.

DHCP enables individual computers on an IP network to extract their configurations from a server (the 'DHCP server') or servers, in particular, servers that have no exact information about the individual computers until they request the information. The overall purpose of this is to reduce the work necessary to administer a large IP network. The most significant piece of information distributed in this manner is the IP address.

Dynamic Host Configuration Protocol is a protocol for organizing and simplifying the administration of IP configuration for computers in a network. A DHCP server such as WinRoute maintains the settings that are issued to each client within the network that is configured as a DHCP client. These settings define, among other things, where the client must send requests for Domain Name resolution and to whom the client should send all IP traffic that it does not know how to route.

Dynamic Host Configuration Protocol. Windows NT Server software that assigns an IP address to each node in a network dynamically. Dial-up Connection: A connection to the Internet via a POTs (plain old telephone) line and modem. Connection types include PPP and SLIP. PPP is a much more standard dialup connection whereas SLIP was more commonly used in the beginning of the Internet.

ynamic ost onfiguration rotocol. Dynamic Host Configuration Protocol allows the dynamic leasing of IP addresses to those computers configured as DHCP clients. By using DHCP, you are freed from the burden of manually assigning IP addresses to most of your workstations.

Dynamic Host Configuration Protocol. Used for automated allocation, configuration and management of IP addresses and TCP/IP protocol stack parameters.

Dynamic Host Control Protocol is a protocol for automatically assigning IP addresses to hosts joining a network.

Dynamic Host Configuration Protocol. Serves up IP addresses to clients at boot-time, so the client does not have a "hard" IP address.

The acronym for Dynamic Host Configuration Protocol. This is a TCP/IP protocol that provides for automatic/dynamic IP addresses. If your computer is set for DHCP, your ISP will automatically assign you an IP address each time you log on to the network.

A communications protocol that is similar in effect to the Bootstrap Protocol, but more sophisticated in design. Among other important differences, it can base network configuration data on geographical information rather than a client computer’s unique Ethernet Address. This in turn allows a network to recognize a client computer continuing identity despite moves between several physical locations.

Dynamic Host Configuration Protocol. A protocol that is capable of automatically configuring the iP address, subnet mask, default gateway, and DNS addresses within a network.

Dynamic Host Configuration Protocol - a protocol that describes the service of providing and managing IP addresses to clients on a network.

Dynamic Host Configuration Protocol. A process by which a machine assigns a single IP address to a PC on a network. This IP address is taken from a 'pool' of addresses. The PC would be set up to receive its IP address 'dynamically' via its networking settings. This system allows easy administration of a network since individual addresses are not 'tied' to a particular machine. Together with the concept of a 'lease' whereby a time is specified for the duration of that IP address, it becomes possible to administer a network where there are more machines than available IPs in the pool.

Dynamic Host Configuration Protocol. Enables individual computers on a network to connect to a DHCP server and be assigned an IP address. Used in ResNet.

Dynamic Host Configuration Protocol. Designed by the Internet Engineering Task Force ( IETF) to reduce the amount of configuration that is required when using TCP/IP. DHCP allocates IP addresses to hosts. It also provides all the parameters that hosts require to operate and exchange information on the Internet network to which they are attached.

ynamic ost onfiguration rotocol. A protocol available with many operating systems that automatically issues IP addresses within a specified range to devices on the network. The device retains the assigned address for a specific administrator-defined period.

Dynamic Host Configuration Protocol (DHCP) is a protocol for assigning dynamic IP addresses to devices on a network. DHCP lets network administrators centrally manage and automate the assignment of IP addresses in an organization's network.

The Dynamic Host Configuration Protocol (DHCP) is a protocol that automatically assigns IP addresses to network devices on a network.

Dynamic Host Configuration Protocol. DHCP is a means of distributing IP addresses and initial parameters to the appliances.

Short for Dynamic Host Configuration Protocol, a protocol for assigning dynamic IP addresses to devices on a network. With dynamic addressing, a device can have a different IP address every time it connects to the network. In some systems, the device's IP address can even change while it is still connected.

Dynamic Host Configuration Protocol - Provides automated allocation of IP addresses. A program may view the data set simply as data, and not concern itself with access methods.

Dynamic Host Configuration Protocol, by which IP addresses are assigned dynamically (when requested by the client) rather than statically (one by one, in advance). A DHCP server is a device that assigns your computer (or router) its IP configuration. The purpose of using this protocol is reduce the amount of work involved in administering a large IP network.

Stands for "Dynamic Host Configuration Protocol". A protocol that dynamically (automatically) assigns an IP (Internet Protocol) address to the device requesting an IP address. An example of an IP address is 10.128.10.67.ThiS address may expire after a pre-determined time and a new address would then be automatically assigned.

Dynamic Host Configuration Protocol (for auto configuration of LAN devices)

Dynamic Host Configuration Protocol. A standardized client-server IP networking protocol that enables network administrators to centrally and automatically manage the assignment of IP addresses in an organization's network.

Dynamic Host Configuration Protocol. DHCP is a protocol that allows TCP/IP settings of a networked computer, called a DHCP client, to be configured automatically from a central DHCP server. In the BBSM Hotspot network, the BBSM Hotspot server is a DHCP server, and a guest computer may be a DHCP client.

(Dynamic Host Configuration Protocol). Windows 95, 98 and NT contain software that assigns IP addresses to workstations on a network. These assignments are made by the DHCP server software that runs on Windows NT Server, and Windows 95 and 98 will call the server to obtain the address. Windows 98 will allocate itself an address if no DHCP server can be found.

The "Dynamic Host Configuration Protocol", or the protocol that provides a way to allocate IP addresses on a network. The system administrator assigns a range of IP address to DHCP and each client computer has its TCP/IP software configured to request an IP address from the DHCP server. Networking Standards and Technologies

Dynamic Host Configuration Protocol. A protocol that offers dynamic assignment of IP addresses and related information for temporarily connected network users.

This is a protocol for automatic TCP/IP configurations providing static and dynamic address allocation and management.

The Dynamic Host Configuration Protocol (DHCP) is an internet protocol that automates the allocation of ip addresses for computers that use TCP/IP.

Dynamic Host Configuration Protocol. DHCP is a client-server protocol that is used for client computers (workstations) to request their IP configuration information from a central server.

Dynamic Host Configuration Protocol. A protocol that provides a means to dynamically allocate IP addresses to computers on a local area network.

A specification for the service provided by a router, gateway, or other network device that automatically assigns TCP/IP network settings (including an IP address to any device that requests one).

Dynamic Host Configuration Protocol - A protocol used to distribute dynamically assigned IP addresses and other important networking parameters. The DHCP server "leases" an IP from its pool to clients on request. The lease is renewed at regular intervals. This is a common protocol on bridged DSL networks, and cable modem networks.

Dynamic Host Configuration Protocol. A standard, defined in RFC 1531, for computers on a TCP/IP network to request from a central server information such as the IP number they should be using, the netmask, the gateway, etc. Rather than an administrator entering this information into the machine configuration, the machine simply requests it from the server as it is preparing to attach to the network.

(Dynamic Host Configuration Protocol) - A protocol that lets one device on a local network, known as a DHCP server, assign temporary IP addresses to the other network devices, typically computers.

Dynamic Host Configuration Protocol. A technology allowing TCP/IP address, subnet mask, gateway and other parameters to be assigned to a workstation automatically.

Dynamic Host Configuration Protocol. A method of automatically assigning an IP address to a client system.

Dynamic Host Configuration Protocol - In a DHCP environment, IP policy is dynamic. This means that a terminal does not have a constant IP address. Management keys for identifying endpoints in a DHCP environment are the alias name or phone number of an endpoint.

(Dynamic Host Configuration Protocol) Issues IP addresses automatically within a specified range to devices such as PCs when they are first powered on.

Dynamic Host Configuration Protocol. A protocol for assigning dynamic IP addresses to computers on a network or on the Internet. With dynamic IP addressing, a device can have a different IP address every time it connects to the network or to the Internet. Some telephone companies use dynamic IP addressing for their DSL services. With dynamic IP addressing you cannot host a Web or e-mail server. TransEdge uses static IP addressing which allows you to host Web and e-mail servers, and even participate in video conferencing.

Acronym for Dynamic Host Configuration Protocol. A TCP/IP protocol that automatically assigns temporary IP addresses to computers on a local area network (LAN). The USR8200 Firewall/VPN/NAS supports the use of DHCP. You can use DHCP to share one Internet connection with multiple computers on a network.

(Dynamic Host Configuration Protocol) Enables automatic IP address assignment to machines when they are connected to a LAN.

Dynamic Host Configuration Protocol. A protocol for assigning dynamic IP addresses on a network. DHCP can also assign network options, such as default gateways, WINS servers, and DNS servers.

Is the Dynamic Host Configuration Protocol.

Short for Dynamic Host Configuration Protocol. A function of the DHCP server that assigns IP addresses from a list on a continual basis.

protocol by which a server automatically assigns IP addresses to clients so users doesn't have to configure them manually. DHCP stands for Dynamic Host Configuration Protocol.

The service that provides users with unique IP Addresses on a network. This is most often performed by the Server or Firewall.

(Dynamic Host Configuration Protocol A way to allocate TCP/IP addresses on demand. A DHCP server assigns an IP address to client computers at boot time, and retrieves the IP addresses when they disconnect. DHCP has several benefits: it reduces the number of IP addresses (which are in short supply), reduces support because mobile workers do not have to reconfigure their PC when they move between offices, and it makes it easier to reconfigure the network because clients are automatically configured.

(Dynamic Host Configuration Protocol) A protocol designed to assign IP addresses dynamically upon system startup.

Dynamic Host Configuration Protocol - An automatic system for configuring TCP/IP hosts on a network, DHCP can supply systems with an IP address and other essential details making it much easier to control multiple systems.

(Dynamic Host Configuration Protocol) A mechanism for allocating IP addresses dynamically so that addresses can be reused when hosts no longer need them.

Dynamic Host Configuration Protocol - Allows a host to obtain configuration information (such as IP address and DNS server address) automatically

Dynamic Host Configuration Protocol- An IP address is automatically assigned to each computer as needed by the network administrator.

Acronym for Dynamic Host Configuration Protocol. DHCP is a protocol used to assign an IP address to a device connected to a network.

Dynamic Host Configuration Protocol A network protocol which can be used to inquire a server about information for the intended system configuration (like IP address, host name, netmask, name server, routing, name of a boot image, address of NFS server, etc.). Sucessor of BOOTP

Dynamic Host Configuration Protocol. DHCP is the process of automatically configuring the TCP/IP settings for every computer on a network.

A protocol used by a server/router that allows the client stations to be configured dynamically. The clients receive all their IP addresses, gateways, and DNS from the server/router, rather than having the settings statically configured on each client.

Dynamic Host Configuration Protocol. A means of automatically assigning an IP address to a device (eg, PC) on a network as it comes alive.

(Dynamic Host Configuration Protocol) - A protocol that allows IP addressing information to be dynamically assigned by a server to clients on an as-needed basis.

Dynamic Host Configuration Protocol. A protocol which allows a server to dynamically assign IP addresses to network devices automatically. In the cable data architecture, a DHCP Server provides cable modems and their associated CPE devices with registration, IP network configuration, and TFTP information required to connect to, and be authenticated by, the CMTS.

Dynamic Host Configuration Protocol. A TCP/IP protocol that provides static and dynamic address management.

Dynamic Host Control Protocol. A protocol that is used to dynamically allocate and assign IP addresses. DHCP allows you to move network devices from one subnet to another without administrative attention. RFC 2131 and RFC 2132. dial peer An addressable call endpoint. In Voice over IP (VoIP), there are two types of dial peers: POTS and VoIP.

A TCP/IP protocol that dynamically assigns an IP address to a computer.

Dynamic Host Configuration Protocol. A mechanism for a device to acquire an IP address from a server. Like BOOTP, it allows for central management of IP addresses. However, it is far more flexible in that IP addresses are leased rather than owned. A device may get one IP address in one session but a different IP address in another session.

DHCP- Dynamic Host Configuration Protocol. Method of assigning temporary IP addresses to computers to ensure network security.

A protocol for managing computer networks that allows for automatic assignment of IP (see also) addresses on the LAN or WAN, freeing network administrators from having to assign and manage IP addresses manually.

(Dynamic Host Configuration Protocol) A standard proposed in RFC 1541 for transferring network configuration information from a central server to devices as the devices boot up. This data typically includes a machine's IP address, which the server can change and allocate automatically (on the fly) under DHCP.

Dynamic Host Configuration Protocol. Allocates IP addresses dynamically so that they can be reused when no longer needed.

Dynamic Host Configuration Protocol - commonly used in LAN networks it is a protocol that lets network administrators centrally manage and automate the assignment of IP Addresses on the corporate network. There is a DHCP server running which gives out IP addreses to the computers connected to a local network.

Dynamic Host Configuration Protocol. An Internet protocol used for assigning network layer (Internet Protocol) addresses. Or the DHCP is an Internet standard for assigning IP addresses dynamically to IP hosts.

Allocation of an IP address at connection from a 'pool' of available addresses. Also referred to as a Dynamic IP Address. DHCP assigned IP addresseshave a 'lease' whereby the address will be returned to the pool if unsused for the time specified.

Short for Dynamic Host Configuration Protocol, a protocol for assigning dynamic IP addresses to devices on a network. With dynamic addressing, a device can have a different IP address every time it connects to the network. DHCP also supports a mix of static and dynamic IP addresses.

Dynamic Host Configuration Protocol. A TCP/IP service protocol that offers dynamic leased configuration of host IP addresses and distributes other configuration parameters to eligible network clients. DHCP provides safe, reliable, and simple TCP/IP network configuration, prevents address conflicts, and helps conserve the use of client IP addresses on the network. DHCP uses a client/server model where the DHCP server maintains centralized management of IP addresses that are used on the network. DHCP-supporting clients can then request and obtain lease of an IP address from a DHCP server as part of their network boot process. See also: IP address; service; Transmission Control Protocol/Internet Protocol (TCP/IP); lease