The vacuum left in the trail of any fast-moving car which can often “pull” following cars forward. Drafting enables a trailing driver to increase speed and save fuel.
Drivers race in single file and share air flow among them. The first car creates a vaccum that actually pulls the car behind it. Together the cars cut through the air much faster than they do separately.
A procedure where a car gets closer to the car in front and gets pulled along by the vacuum created by the car in front as it passes thru the air. This also helps to push the front car. This allows the cars to gain speed and save fuel.
A race tactic that involves on athlete positioning themself directly behind another athlete either in the run, bike or swim to reduce wind and drag. Is illegal during the bike portion of a triathlon. A penalty will be given to athletes that are drafting. Depending upon the race, a penalty can be either a time penalty or even disqualification.
Following closely behind another athlete in order to reduce resistance.
The practice of running two cars in one line (head to tail) to gain speed. The lead car displaces the air, creating a vacuum to suck the trailing car along. Drivers can use it to save gas.
Drafting is the action of following a vehicle closely enough to shield your vehicle from the wind that would normally cause drag on your vehicle. It is very difficult to draft a small R/C car. Report this Word Added by: mkranitz
The practice of two or more cars, while racing, to run nose-to-tail, almost touching. The lead car, by displacing the air in front of it, creates a vacuum between its rear end and the nose of the following car, actually pulling the second car along with it.
Following another rider closely to descrease the energy requirements for a ride.
Skiing directly behind another skier in order to take advantage of his or her slipstream. Drafting enables the skier to do less work, and makes it easier to maintain an even pace.
The practice of following immediately behind another car to take advantage of the lead car's "punching a hole" in the wind.
The practice of two or more cars, racing nose to tail, almost touching. The lead car, by displacing air in front of it, creates a vacuum between its rear end and the following car's nose. The second car is actually pulled by the first.
Main article: Drafting (racing) To ride closely behind another rider to make maximum use of their slipstream, reducing wind resistance and effort required to ride at the same speed.[ edit
The technique of riding in a pack during the cycling event. For safety reasons, drafting is forbidden in Long Distance and age-group races.
riding closely behind another rider to take advantage of the windbreak ( slipstream) and use about 20 percent less energy. Also called sitting in or wheelsucking.
Riding closely behind another rider to save energy by using that racer as a windbreak.
A fast-moving car creates a low pressure area behind it, causing the air to try and move with the car. A car following behind can take advantage of this low pressure as it actually sucks the car along faster, known as "being in the slipstream." A savvy driver can either use the draft to pass or to lift off the gas slightly and conserve fuel.
When two cars are lined up nose to tail, the first car breaks the air, allowing the second car to gain speed due to lessened wind resistance.
Riding closely behind another rider, which creates a slipstream, or air pocket. The lead rider expends up to 30 percent more energy than the following rider does.
when riders shelter behind each other in the other riders slipstream, which is called drafting. When behind another rider, less effort is required to maintain the smae pace.
A car closely following another will get a speed boost and save fuel by "drafting," which means it is using the vacuum created behind the leading car to help pull it along.
tucking in closely behind another rider so as to break the wind therefore saving you energy dual slalom - similar to skiing, in which riders maneuver around gates on a short downhill course. echelon - a form of paceline used to get maximum draft in a crosswind.
One or more riders ride single file behind another rider, taking advantage of that rider's slipstream. By doing so the rider behind has less of a headwind and gets a breather. In a crosswind, riders may ride in a diagonal line, instead. Drafting is the lynchpin of most bicycle racing tactics. See also paceline. Jump. The first acceleration in a sprint.
When drivers race in a single file line. When they race in this manner, they can run faster than a single car because the one in front cuts through the air providing a vacuum that actually pulls the car behind it.
Trailing closely behind another cyclist to cut down on wind resistance.
Drafting, or slipstreaming, is a technique in sports racing where competitors align in a close group in order to reduce the overall effect of drag or fluid resistance of the group. Especially when high speeds are involved, drafting can significantly reduce the average energy expenditure required to maintain a certain speed.