Time interval between specified reference points on the input and output voltage waveforms.
The period between when a signal is placed on a circuit and when it is recognized and acknowledged at the other end. Propagation delay is of high importance in satellite channels because of the great distances involved.
One of the test parameters used when testing Category 5E or Category 6 UTP, FTP or ScTP Permanent Links or channels. Propagation delay measures the time taken for the signal to travel from the transmitter to the receiver.
The time required for data to travel from transmission point to destination.
Time required for data to travel over a network, from its source to its ultimate destination.
The time for a signal to travel from input to the output of a device.
The time it takes for a signal to travel across the network.
The time required for a signal to pass along a transmission line
Time required for an electronic digital device, or transmission network to transfer information from its input to its output.
The signal transit time through a cable, network segment, or device. Important in making collision domain calculations.
The time it takes a signal to pass through a macro from input to output, specified in typical time in the macro listing in the AMCC Design Manuals.
The amount of time it takes a signal to travel through a cable or system.
The specified amount of time for a signal to pass through a previously closed signal path. The delay must be considered, for example, when the signal is used to synchronize other signals, or is being used in a Clock / Data configuration. This is due to both the electrical length of the signal path, and any active components in the signal path.
The amount of time that passes between when a signal is transmitted and when it is received at the opposite end of a cable or cabling.
The change in the travel time of sound between a source and scatterer, generally due to radial motion. As an example: if it takes longer for sound to reflect back from a scatterer than it did a short while ago (and the speed of sound has not changed), then the scatterer must be getting farther away.
The time delay between the occurrence of a change at the output (either HI to LO or LO to HI) and the application of a change at the inputs. Silicon The dominant semiconducting material used in integrated circuits at this time (2001) Schmitt trigger Additional circuitry added to a basic gate or circuit so as to introduce hysteresis. Helps to counteract spurious behavior due to noise
The time it takes for a signal to travel to the satellite and back to the earth. Satellite signals travel at the speed of light and complete the trip in 270 milliseconds.
Time required for a signal to pass from the input to the output of a device.
7nbsp;The time required for a signal to pass through a component or circuit, measured at the 50% points on the input and output waveforms.
The amount of time required for a signal to pass through a circuit.
The time it takes for the beginning of a frame to arrive at its destination.